VICTRON SMARTSHUNT IP65 500A / 50mV Bluetooth Battery Monitor
VICTRON
$238.00
The SmartShunt IP65 is an all-in-one battery monitor, only without a display. Your phone acts as the display.
The SmartShunt IP65 is water resistant and is available in a 500 A, 1000 A or 2000 A version.
The SmartShunt IP65 connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively, the SmartShunt IP65 can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE. Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, has a VE. Direct port and an auxiliary connection that can be used to monitor a second battery, for midpoint monitoring, or to connect a temperature sensor.
SPECIFICATIONS
Supply voltage range Current draw: 6,5 - 70 VDC< 1 mA
Input voltage range, auxiliary battery: 6,5 - 70 VDC
Battery capacity (Ah) Operating temperature range Measures voltage of second battery, or temperature, or midpoint: 1 - 9999 Ah-40 +50 °C (-40 – 120 °F)Yes
Temperature measurement range VE.Direct communication port -20 +50 °C: Yes
RESOLUTION & ACCURACY
Current: ± 0,01 A
Voltage: ± 0,01 V
Amp hours: ± 0,1 Ah
State of charge (0 – 100 %): ± 0,1 %
Time to go: ± 1 min
Temperature (if optional temperature sensor connected): ± 1 °C/°F(0 – 50 °C or 30 – 120 °F)
Accuracy of current measurement: ± 0,4 %
Offset: Less than 20 / 40 / 80 mA
Accuracy of voltage measurement: ± 0,3 %
INSTALLATION & DIMENSIONS
Dimensions (h x w x d): 500A: 46 x 120 x 54 mm1000A: 68 x 168 x 75 mm2000A: 68 x 168 x 100 protection
Protection category: IP65
STANDARDS
Safety Emission / Immunity Automotive: EN 60335-1EN-IEC 61000-6-1 EN-IEC 61000-6-2EN-IEC 61000-6-3EN 50498
Cables: Two 1.5 m cables with 1 A fuse, for ‘+’ connection and starter battery or midpoint connection
VE.Direct cable: 1.5 m cable with a VE.Direct socket. Note that a (not included) VE.Direct cable is needed to connect a GX device.
Temperature sensor: Optional (ASS000100000)
The shunt and the electric cables do negatively influence the range of the Bluetooth signal. The resulting range of 10-15 meter is however satisfactory in most cases. The proximity of other electrically conducting elements, such as the metal chassis of a vehicle or seawater around the hull if a boat, may reduce the range of the Bluetooth signal to an unacceptable level. The solution in such a case is to add a VE.Direct Bluetooth Dongle (ASS030536011) to the system, and to switch off Bluetooth in theSmartShunt.