R41 ROAM CEL-FI GO + ZETIFI 105cm Smart Cellular Antenna 5G 4G Smart Mobile Phone Signal Booster

NEXTIVITY

$1,353.00

INTEGRATED PORTABLE CASE
Quantity

R41 ROAM CEL-FI GO Mobile Signal Booster Kit with ZETIFI 105cm Cellular Signal Vehicle Smart Antenna

12V DC COMPATIBLE ONLY - 24V DC Applications Require Voltage Reducers. Please follow link below.

Victron Orion-Tr 24/12-5 (60W) DC-DC converter


ZETIFI Smart Antenna - The only antenna that automatically adapts to its surroundings 

Automatic switching between high and low gain modes to maximize signal for CEL-FI signal repeaters.

Zetifi’s revolutionary Smart Antennas use patent-pending ZetiLink™ technology to automatically switch between high and low gain modes based on GPS location, attitude (tilt), or user selection. A single smart antenna that automatically selects the optimal gain mode and ensures optimal signal whether you’re in flat or hilly terrain, without needing to swap antenna whips!

Get more out of your signal repeater or cellular gateway with the convenience and enhanced performance of a Zetifi Smart Antenna

Reconfigurable antenna whip

Innovative antenna beamforming technology creates high and low gain modes within a single antenna.

GPS location sensor

Inbuilt GPS sensor reports location to ZetiLink™ processor to identify your terrain and environment as flat, hilly or urban.

Gyroscope tilt detection

Attitude (tilt) data from inbuilt gyroscopic sensor allows adjustments to be made for road gradient.

ZetiLink™ processor engine

Integrated processor computes location and antenna attitude (tilt) data in real time to determines optimal antenna setting.

HOW IT WORKS!

  1. Inbuilt GPS and gyroscope detect antenna location and attitude (tilt).
  2. ZetiLink™ engine processes data to determine optimal antenna mode.
  3. Antenna seamlessly switches between high and low gain modes as required.

SPECIFICATIONS:

  • Gain: Variable gain 3dBi & 6.5dBi
  • Frequencies: 698-900 MHz, 1710-2700 MHz, 3400-3800 Mhz
  • Power: 0.5W 12V
  • Length: 1050mm

TELSTRA, OPTUS, VODAFONE & MVNO APPROVED + ACMA EXEMPT 

The CEL-FI GO ROAM R41 is a plug-and-play cellular coverage solution designed for nomadic applications, offering seamless connectivity on the go. It serves as a replacement for the GO G31 mobile systems and provides instant coverage improvement for voice and data transmission during travel. The ROAM R41 features enterprise-grade performance, a user-friendly installation design, and compatibility with various vehicles. Equipped with the advanced 4th generation Nextivity IntelliBoost chip, it ensures reliable 3G, 4G and 5G connectivity, addressing poor coverage issues for individuals and fleets. The low-profile design allows discreet installation, and its rugged frame enhances durability, making it suitable for various environments. The plug-and-play operation makes it easy to set up within minutes, providing a reliable solution for staying connected while on the move.

NETWORK SELECTABLE BY THE USER (TELSTRA, OPTUS, VODAFONE & MVNO)
The all-new 5G NR Low Band ready R41 ROAMING Vehicle CEL-FI GO cellular mobile signal booster repeater amplifier is now compatible with all three of Australia's largest network carriers Telstra, Optus and Vodafone including MVNO via network selection. Each network can hold up to 20 devices simultaneously. R41 Roaming signal boosters are designed for in-vehicle mobile applications including cars, trucks, motorhomes and boats.

Click Here to Check your TELSTRA Mobile Signal Coverage
Click Here to Check your OPTUS Mobile Signal Coverage
Click Here to Check your VODAFONE Mobile Signal Coverage

5G NR LOW BAND IS PRIMARILY USED IN REGIONAL AND RURAL AREAS.
Metropolitan areas rely on the faster 5G Mid Band which is not covered by this device as CEL-FI GO's are generally not required in metropolitan areas.

5G NR LOW BAND READY - SUPPORTS MORE BANDS
The R41 CEL-FI GO by NEXTIVITY can support TELSTRA, OPTUS and VODAFONE bands in Australia. These bands include 700L/ 850/ 900/ 1800/ 2100 and 2600 Mhz. 700Mhz band is not supported on the Vodafone Network.

AUTOMATIC BAND SELECTION FEATURE
You no longer have to select 3G or 4G or 5G NR Low Band, with the R41 CEL-FI GO, this vehicle mobile signal booster device can automatically select the best quality signal band so you can enjoy the best signal reception for your voice and data applications based on what's available in that area from your carrier.

R41 CEL-FI GO FEATURES

  • Ideal for boosting mobile signal in a car, van, 4WD, truck, motorhome, caravan or boat.
  • Support for 5G NR Low Band, 4G & 3G 
  • Telstra, Optus and Vodafone Network
  • Suitable replacement for GO G31/G32 Mobile
  • Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
  • Latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
  • Ease of installation with plug-and-play operation

R41 ROAM CEL-FI GO TECHNICAL DETAILS

  • Dimensions @ 79.8(D) x 44(H) x 170.7(L) mm
  • Weight @ 490 grams
  • IP Rating @ ip54
  • Operating Temperature Range 0-60 Degrees Celsius
  • RF Gain @ 100dB
  • Current Consumption @ 18 Watts
  • Input Voltage @ 11.5 to 15V DC

IN THE BOX

  • CEL-Fi GO ROAM R41
  • Automobile Auxiliary Power Adapter (CLA)
  • Internal Server Antenna
  • Mounting Hardware
  • Ground Cabling


Please note that Images of Accessories may change or be different.

SKU: R41-Z105
 

This product has been added to your cart

CHECKOUT